Hurley H2O Davit System (10" Mount Version)

Hurley H2O Davit System

10" Mount Version

This rugged dinghy davit system lets you lift and pull your dinghy on for easy storage or just push-off for launching. Easily mounted on the swim platform and can be installed while the vessel is in the water.

• Multiple Position Adjusting Chock System, adjusts to hull configuration
• Can Be Used for Soft or Rigid Tenders
• Adjustable Cradle Angles for Easy Deployment & Retrieval
• Independent Cradles with Rollers
• Each Roller Well has a Weap Hole for Water to Drain
• Multiple Mount Sizes to Accommodate Different Size Platforms
• Can Be Used on Hydraulic Swim Platforms with Existing Channels to Remove Those Ugly & Dangerous Chocks
• Superior Quality and Craftsmanship
• Weighs in at only 14 pounds
• Two year warranty
• 350 pounds (159 kg) capacity

​With the Sleek Euro Design, Marine Grade High Density Polyethylene Cradles and Stainless Steel Components the Hurley H2O Dinghy Davit Functions as Good as it Looks and is Impervious to Harsh Environments. Our revolutionary new stainless steel mounting system provides a quick release, leaving a very small footprint profile that could pull a barge. Each mount footprint requires only two bolts for the install and only stands 5/8″ high leaving a clear deck for any activity.

The H2O Dinghy Davit is easily mounted on the swim platform.  This hassle free system lets you lift and pull your dinghy on for easy storage or just push-off for launching.

Properly Measuring for your Davit Mount Size

Key Dimensions Needed



A = Swim platforms internal width
B = Platforms depth (transom to edge)
C = Distance from top of platform to the water
D = Beam of dinghy

To determine which mount system will work best for you, measure the beam of your dinghy, divide by 2 and add 4 inches. Now measure your platform (transom to the edge).

You must add a number below to your platform length figure in order to determine which mount to use.

Example: If your dinghy width is 60" then divide by 2 + 4" = 34". Swim platform is 32". By adding 2" to the platform this would make it equal to the dinghy width of 34" so then you would have chosen the 6" mount.

0" ~ 2" for the 6" Mount
2" ~ 4" for the 8" Xtensions
4" ~ 6" for the 10" Xtensions
6"+ for the 36" Xtensions

Hint: 4 inches of the mount must be used to secure to the platform